What is the Performance Grade
Actually performance grade is modify bitumen with polymer or several additive .
The interest in the modification of bitumen using polymers, whether virgin, scrap or polymer blends, is intense. The last two decades, in particular, have seen an increase in the number of academic groups studying polymer-modified bitumen and correspondingly the peer-reviewed literature in the field has increased. Initially, studies on polymer modified bitumen focused more on engineering and empirical measurements, e.g. ageing and softening point. However, in recent years a plethora of techniques have been employed in the study of the effect of the addition of polymers on a range of bitumen properties, polymer_bitumen morphology and polymer_bitumen interactions.
Pavements designed and constructed for heavy-duty traffic and extreme weather conditions require specially designed engineered Bitumen Grades. By changing the characteristics of normal bitumen with the addition of a polymer, either they are of elastomeric nature or elastomeric, we succeed to obtain bitumen that allows the mixture to be more cohesive, with much more strength and significant higher resistance to parameters like fatigue and permanent deformations for road pavements.
Polymer Modified Bitumen:
(PMB) is one of the specially designed and engineered bitumen grades that are used in making pavement, roads for heavy duty traffic and home roofing solutions to withstand extreme weather conditions. PMB is a normal bitumen with the added polymer, which gives it extra strength, high cohesiveness and resistance to fatigue, stripping and deformations, making it a favorable material for infrastructure.
When a polymer is added to regular bitumen, it becomes more elastomeric, which provides it with additional elasticity. The polymer that is added is styrene butadiene styrene (SBS), which acts as a binder modification agent. The primary objective of SBS polymer modified bitumen is to provide extra life to pavement, roads and construction designs. Some of the qualities exhibited by PMB are:
- Higher rigidity
- Increased resistance to deformation
- Increased resistance to cracks and stripping
- Better water resistance properties
- High durability
Advantage of using polymer modified asphalt:
- stronger road with increased marshall stability value and greater Rigidity.
- better resistant towards rainwater and water stagnation.
- no stripping and no potholes.
- Better resistance to permanent deformation
- reduction in pores in aggregate and hence less rutting and raveling.
- Much higher durability
Common types of polymer modified asphalt:
The following table lists some common asphalt cement and HMA modifiers and their general purpose/use.
||General Purpose or Use
||Fill voids and therefore reduce optimum asphalt content
Meet aggregate gradation specifications
Improve the asphalt cement-aggregate bond
||Substituted for a portion of asphalt cement (typically between 20–35 % by weight of total asphalt binder) to decrease the amount of asphalt cement required
||Increase HMA stiffness at high service temperatures
Increase HMA elasticity at medium service temperatures to resist fatigue cracking
Decrease HMA stiffness at low temperatures to resist thermal cracking
(see Figure 2)
(e.g., Polychloroprene latex)
(e.g., Styrene-butadiene-styrene (SBS))
(e.g., crumb rubber from old tires)
Ethylene acrylate copolymer
Polyvinyl chloride (PVC)
Ethylene propylene or EPDM
||Blends of rubber and plastic
||Improving tensile strength of HMA Mixtures
Improving cohesion of HMA Mixtures
Permit higher asphalt content without the significant increase in the drain down
||Increase HMA stiffness after the HMA is placed
||Increase the durability of HMA mixtures by retarding their oxidation
||Restore aged asphalt cement to current specifications
Increase HMA stiffness in general
|Recycling and rejuvenating oils
Hard and natural asphalts
||Minimize stripping of asphalt cement from aggregates
||Replace aggregate or asphalt volume with a cheaper waste product
Use as needed
While the benefits of using modified asphalts are widely acknowledged, not all asphalt mixes or treatments need to be modified. Each application should be evaluated to determine if the traffic loading, anticipated service life, environmental conditions and desired performance justify the use of modifiers. Modified asphalts can be a good investment.
- The rheological properties of conventional binders may be modified by the introduction of:
- Crumb rubber;
- The modification is costly and is normally justified when bituminous surfacing are subjected to severe conditions such as:
- Steep gradients;
- Very high road surface temperature;
- High traffic loading; or
- Heavily trafficked intersections.
- Modification may also be advantageous for surfacing on highly flexible and cracked pavements, where an improvement in the rheological properties of the bitumen is required.
- Use in such applications should be guided by expert opinion.
- In addition to the primary aims above, the range of properties improved include
- Aggregate retention;
- Resistance to permanent deformation;
- Resistance to fatigue cracking;
- Cohesion (internal strength);
- Viscosity less susceptible to temperature changes.
- Modification agents
- The primary aim of the modification of bitumen for use in structural layers is to increase the resistance of these layers to permanent deformation at high road temperatures without compromising the properties of these layers over the rest of the prevailing temperature range.
- The use of polymer modified bitumen to obtain improved performance is rising as a result of increases in tire pressures, axle loads, and higher traffic volumes.
- Improved performance can be achieved in two ways, both of which are aimed at reducing the permanent strain:
- An increase in the elastic component with an associated reduction in the viscous component; and
- Stiffening of the bitumen to reduce the total viscoelastic response of the layer.