OXIDIZED BITUMEN 115/15

DESCRIPTION
OXIDIZED ASPHALT 115/15 IS BASED ON PETROLEUM BITUMEN WHICH IS MADE BY BLOWNING BITUMEN 60/70 BY VERY HOT AIR.

RECOMMEND USES
IT IS USING AS RAW MATERIAL FOR BITUMEN COAT, ROOFING, INSULATION AND ISOLATION BITUMEN MEMBRANE SHEET.

SURFACE PREPARATION
SURFACES MUST BE DRY, CLEAN AND FREE OF LOOSE PARTICLES, FORMWORK, CURING PRODUCTS, IRREGULARITIES, SLURRY, ETC.

APPLICATION
THE OXIDIZED ASPHALT SHOULD BE HEATED DOUBLE TEMPRATURE AGAINST THE SOFTENING POINT TO BE ABLE TO HAVE FLOW AND VISCOSITY.

STORAGE/HANDLING
10 YEARS WITH MULTI TIME HEATING AND COLDING, PLEASE REFERE TO MSDS.

PACKING
AVAILABLE IN 25KG MELTABLE AND CRAFT BAG, DRUM PACKING.

ANALYZE

TEST SPECIFICATION

STANDARD RANGE

TEST METHOD

Specific gravity @25/25 oC

1.05 approx.

D-70

Penetration @25oC

10/20

D-5

Softening point oC

110/120

D-36

Ductility@25oC

1.5min

D-113

Loss on heating (wt)%

0.2max

D-6

Flash point oC

260min

D-92

Solubility in CS2 (wt)%

99min

D-4

Specific gravity @25/25 oC

1.05 approx.

D-70

 

Oxidized Bitumen 115/15  made by air Blowing Process. Heated Bitumen penetration under controlled environment is blown with air which controls oil content in bitumen while it oxsied. Different grades for suited uses produced. Grades designated by two numbers to indicate mid-points of softening point. Also their penetration ranges.

 

  • Address:
    No 220, 32nd Floor, Tower 2, Altinoran-Sinpash, Turan Gunesh, Ankara. Turkey.

About Us

We believe that its very light version & Simple, Creative & Flexible Design with Standards

Support
  • Monday-Friday: 9am to 5pm
  • Saturday: 10am to 2pm
© Copyright 2021 Blownasfalt